Call 8am-5pm MT M-F 1-866-724-6240

Tuesday, October 18, 2011

What is a Hot Tub Blower?


Hot tub blowers are also commonly referred to as air pumps or bubblers, as these names imply, a blower does just that, blows air into your hot tub water causing bubbling.

How does it work?

The blower is a unit that utilizes a fan to create air flow; it then forces the air through channels into the jets that allow for a release. The combination of air and water flow through the jets can provide a wonderful massage experience for the hot tub user.

What Do I Need to Know about a Blower?

If your spa does not currently use a blower and you are contemplating adding one, first of all you will want to make sure that your control pack will run a blower, it is a specific function that the control pack needs to be capable of operating. Also make sure you are ready to do the plumbing needed to connect in the air flow to your jets.

Also there are a few things to know that some people consider disadvantages of having a blower. The first is having the air injected into your water can cool down the water temperature and it does expend energy to have to keep reheating the water to maintain the higher temperature. Some people also find the blower running with the jets is too loud and interrupts there relaxation, but on the other hand many people count on the jets as their key to relaxation; so it all really comes down to personal preference.

If you already own a blower, they are a fairly simple piece of machinery that basically consists of a fan motor and housing. For this reason we recommend that if your unit goes out you replace the entire unit as it is much simpler and trying to just replace parts will offer little to no cost savings.

When looking for a new blower it is important to make sure you determine the correct voltage needed for your control unit, as they come in both 110V and 220V. Also, make sure your get the correct size to link up to your plumbing, usually 1.5” or 2”.

There are also different plug types available based on what type you need. Our Ultra and Max blowers include both a 4 FT Amp Cord and 4 Pin Plug. Our Silent Aire Blowers come with the option at checkout of a 3-pin Molded Plug, a 4-Pin Amp plug, a Gecko XM/XE 240 Volt Plug, or if you plan on hard-wiring and do not need a plug that is also an option.

How Can I Extend the Life of My Blower?

Premature blower failure is most often caused by water intrusion, there are a few ways to reduce the chance of water intrusion therefore extending the life of you spa blower. A Hartford loop in your plumbing that the use of a check valve will greatly decrease your chances of water intrusion, make sure that your installer/ technician uses both, it is also a recommendation that you replace your blower check valve anytime you replace your blower.

No comments:

Post a Comment