Call 8am-5pm MT M-F 1-866-724-6240

Monday, August 15, 2011

Why did I get a Rash from my Hot Tub?

Your hot tub is supposed to be your relaxing oasis, the last thing you want is for it to leave you with red irritating bumps all over your skin. Unfortunately, this can be a common problem if your hot tub sanitizer is too low and not being maintained properly.

Warm water can be an ideal breeding ground for microorganisms such as bacteria, fungi, protozoa's, and viruses. Sanitizers in spas such as bromine or chlorine are used to kill these microorganisms, and maintain safe, clean water for bathers. People often think they are allergic to spa sanitizers after developing a rash from bathing, but usually the culprit is actually inadequate sanitizer which leads to the buildup of microorganisms that can cause skin irritation and rash.

Hot Tub Folliculitis is a common condition caused by Pseudomonas bacteria, and can often be found where there is a spa sanitation issue. The symptom most often associated with hot tub folliculitis is small reddish bumps or an itchy rash; it can commonly be confused as a bug bite. With Hot Tub Folliculitis bumps can cover the entire body but tend to be more prominent in areas where the bathing suit covers. If you develop symptoms it is best to contact your health care provider, although the symptoms typically clear on their own after a few days. Also keep in mind that while your doctor is an expert in human conditions, they may not be an expert in proper spa care so please follow the tips below to keep your spa safe and microorganism-free!

Proper Care Tips to Avoid Contamination:

· Refill your spa with fresh clean water at least every 4 months. The use of a Spa Pure Pre-Filter may help in getting you water balanced properly from the get go.

· Maintain proper sanitizer levels, whether you are on a bromine, chlorine, or biguanide system.

· Shock treat regularly, especially after heavy usage.

· Test your water often using proper test strips or test kit!

· Maintain proper pH and alkalinity levels.

· If your spa cover is in poor condition, smells, or is water logged---replace it. It will not only help fight microorganisms but also help with energy savings.

· Before each drain and refill purge your spa of any build up using Spa Purge!

· Give your filters a deep clean at each drain and refill, and replace them when needed.

By properly caring for your hot tub you can ensure that it is a healthy and safe environment for all those who enjoy it.

Friday, July 22, 2011

Hot Tub Mineral Systems

Hot Tub Mineral Systems

Mineral care is not a replacement for bromine or chlorine, but works together with it and allows you to keep bromine or chlorine levels much lower than would normally be needed. With a mineral system you can keep bromine or chlorine levels as low as 1.0 part per million (ppm), this allows you to have clean sparkling water without the negative affects of chlorine or bromine like stinky chemical odors and fading swimming suits.

How Does It Work?

Mineral Systems come in a few different brands and forms. At Hot Tub Warehouse, we carry Spa Frog Minerals. These systems uses and active ingredient of Silver Chloride that destroys bacteria while neutralizing acid, this helps to keep pH in the proper range with little maintenance.

The Filter Frog system is used with a design that allows the unit to fit right inside most spa filters, and it lasts for 4 months at a time. Releasing minerals into the water as it flows over it.
The other option is the Spa Frog Mineral Cartridges which are used together with Spa Frog Bromine Cartridges in either a floating or inline system. These cartridges release minerals into the spa and also need to be replaced every 4 months.

What levels should be maintained?

When using a mineral system keep in mind that it cannot be used alone, but together with either bromine or chlorine! Whenever you start with fresh water, which should be at least every 4 months, you need to be sure and give the water an initial shock treatment to establish a residual level of chlorine or bromine at 1.0-2.0 ppm. After initial water balancing levels should be maintained as follows:

pH: 7.2-7.8
Total Alkalinity: 80-180 ppm
Calcium Hardness: 150-400
Chlorine or Bromine- 1.0-2.0 ppm

It is a good practice to continue to shock treat your water once per week or more depending on use.

Using a mineral system can be a great option to kill bacteria in your spa water while maintaining water clarity, keeping pH in neutral territory, and reducing bromine or chlorine usage for softer and more comfortable water.

Friday, April 15, 2011

Replacing My Spa Pack


Your Spa Pack is basically the brains, or motherboard of your spa. Its job is controlling all your spas components like your pump, heater, lights, and more. As the main control system, having a Spa Pack that is in good condition and working properly is very important. Thousands of spas are thrown out each year because of bad control systems, when the shell and cabinet are fine. Typically, you can save yourself thousands of dollars by simply replacing your control system rather than your entire hot tub. If your spa gets a lot of use or is over 7 years old it can be expected that the control system will need to be replaced. Spa cabinets and shells have a much longer life span than control systems, which means you can take advantage of that by replacing the spa pack once or twice during the shell and cabinet lifespan before throwing your tub out and investing in a new one.

When shopping for a new spa pack it is important for you to know a few things about your existing one. For starters, is it a 120 Volt or a 240 Volt system? What combination of items is your existing pack controlling? How many pumps do you have and how many speeds do each of those pumps have? Do you have an ozonator? What about lights? How many kilowatts is your heater? Do you have a blower, circulation pump, or both? Once you know what you need to control you can start shopping.

When shopping the easiest thing to start out doing is find control systems that match the capability of your existing system. For example, if your current system runs on 240 Volts and controls a 5.5 KW heater, a two speed pump, an ozonator, and a light that is what you need to look for.

There are a few other important things to consider when shopping for a control pack. Do you also need a new topside control system? Although you can keep your old one if it is working properly and you make sure it is compatible with your new system, we recommend looking at a Value Pack Control System like these from Balboa, they include a new topside control panel, your new spa pack, a new heater, all applicable cords, and an adapter plate to ensure your new topside control can fit correctly. You will also find that usually a Value Pack like these is much more cost effective than purchasing the items separately. You will also want to look for features that protect the pack against corrosion and water intrusion; the M7 packs from Balboa have a plastic enclosure included that will protect against these elements. When purchasing, also be sure to look for a manufacturer’s warranty on the pack just in case something does go wrong with it.

Once you have purchased a new spa pack, it is recommended to have it installed by a professional spa technician, but if you find yourself to be very handy and take the proper precaution’s for working with electrical parts, there is most often a wiring diagram and instructions for installation included.

Tuesday, March 29, 2011

Ozone and Ozonators



First of all you are probably asking, what is ozone? Ozone is a form of oxygen that is created when electrical energy breaks apart an ordinary oxygen molecule starting a chemical reaction which results in ozone. Oxygen molecules are split, by a high-energy electrical discharge, resulting in two individual oxygen atoms and those individual oxygen atoms unite with remaining oxygen molecules to produce a three-atom molecule of ozone. The weak bond holding ozone’s third oxygen atom causes the molecule to be extremely unstable and thus, very effective as an oxidizer. An oxidation reaction occurs upon any collision between an ozone molecule and an organic molecule, such as bacteria, viruses, fungus and algae, where the oxygen atom held by the weak bond splits off and only oxygen is left behind.

Next I know you are thinking, that is a great chemistry explanation but how does ozone work? An ozonator system duplicates this process and produces ozone safely and in controlled amounts that can help the sanitizing system in your hot tub. When used together with a sanitizer like bromine or chlorine, an ozonator can deeply reduce the levels of chlorine or bromine needed to maintain clean water. This allows you to save money on chemical costs. Ozone has also been credited with helping extend the life of your equipment, reducing maintenance time and cost, and it purifies your water naturally. Ozone eliminates the need for weekly shock treatments as ozone is an automatic, daily, non-chlorine shock. With ozone you will be able to use 60-90% less chlorine or bromine which allows your ozonator to quickly pay for itself.

In order for an ozonator to be effective in helping sanitize your water it needs to run for 4-6 hours per day. 90% of all new spas come equipped ozonator ready and it is very easy to install an ozonator if it did not already come with one. Ozonators do need to be replaced about every 3 to 5 years so if you do have an older one and it doesn’t seem to be working as well as it used to it is probably time for a new unit.

If you a buying an ozone unit for the first time there are a few things to consider to make sure you get the best one for your specific tub.

Spa Size: The larger your spa the more powerful ozonator you will need.

Sanitation Level Needed: If you often have large groups of people using your hot tub, you will want an ozonator that has a more powerful sanitation output.

Electrical Needs: You will need to determine what voltage and style cord you need. Ozonators come with a variety of different cords and in 120 volt, 240 volt, or dual voltage options.

Ozone is a great option for your spa in providing a natural sanitizing system while allowing you to save money on chemicals. You will eliminate the need for weekly shocking, which will also save you time. Who doesn’t like to save time and money? With ozone you will have the cleanest, clearest sparkling water that can be found in any hot tub!

Friday, March 11, 2011

Pristine Blue, A Non-Chlorine Option

One of the few things that people dislike about swimming or hot tubing is the chemical odor that can come from the water—not to mention the burning eyes, itchy skin, and chlorine taste when you accidentally get a little drink of the water. Chlorine can also bleach swimming suits and the vinyl liners in pools. Chlorine can be hazardous to store and corrode equipment. Because chlorine has been the dominate product on the market for so long many people don’t realize that there are other choices out there.

If you are interested in going with a Non-Chlorine System, we recommend Pristine Blue. Pristine Blue can provide some advantages over chlorine if you are looking to get rid of the “chemical” odor and side effects that come with chlorine. Pristine Blue is gentle on the skin and eyes and allows for you to swim right after application, unlike chlorine with which there is a need to wait awhile before using the water. Being EPA registered in every state and NSF/ANSI Standard 60 certified shows that Pristine Blue is safe.

There are six different products that make up the Pristine Blue Non-Chlorine water system.

The first, Pristine Blue, is the cornerstone of the system, it works as an algaecide and bactericide while being environmentally friendly also. The active ingredient of Copper Ions, that is bonded with a unique carrier allows Pristine Blue to put enough copper into the water to control both bacteria and algae. The active ingredient is long lasting and stays suspended in the water making it so that after the initial dose you only need to test your level of Pristine Blue every two weeks and top it off as needed with more Pristine Blue, this makes water maintenance very quick and easy!

Pristine Clean, will work against scale and metal build up. Metal and mineral particles can come into your water from things like jewelry, hoses, and metal equipment, Pristine Clean prevents these particles from bonding to your pool or spa walls, keeping your surfaces sparkling clean. Pristine Clean can be added every two weeks when you check your Pristine Blue.

Pristine Power is a non-chlorine shock that dissolves quickly and removes odors, organisms, contaminants and body oils that can cause cloudy water. For swimming pools it is recommended to add Pristine Power weekly or biweekly depending on use, for spas adding the recommended dose of Pristine Power should be done after each use, but not exceeding once per day.

Pristine Extra is a di-chlor based shock that is used for initial startup. This product is 99% sodium di-chlor which dissipates very quickly and lets the water rapidly return to its non-chlorine status.

For clearing cloudy water, Pristine Clear will do the job. It brings suspended particles together which allows the filtration system to get them out of the water. Use Pristine Clear as needed with the recommended dosage to keep your water looking crystal clear.

Pristine Check is used to prepare the water before startup with Pristine Blue and also controls calcium in the water. Because Pristine Check collects all the excess calcium in the water before introducing Pristine Blue into the water, you need to make sure to give your filter a good clean after each use of Pristine Check. Pristine Check should be used in spas anytime the water is drained and refilled and in pools it is recommended to add the recommended dose of Pristine Check anytime you are adding make up water.

The Pristine Blue Mini Test Kit is the best way to test the Pristine Blue levels in your pool and spa water. You will also want to use test strips to test the total alkalinity and pH in your water. It is okay to use other pH adjusters with the Pristine Blue system, but you do not want to use any other metal out products, stain and scale products, algaecides, flocculants and cal-hypo shocks. Use of these products is not needed and may cause Pristine Blue to be ineffective in controlling algae and bacteria.

No matter what sanitation system you choose to use it is always very important to follow the dosing instructions of the product you are using and be sure to test and maintain your water as recommended.

Friday, February 11, 2011

Cover RX by Cover Valet



Finally, a hot tub cover lifting option that will work for virtually any above ground spa! This cover lift does away with problems that people often run into when searching for a cover lift, like shape, clearance, mounting options and more. The Cover RX is truly the right prescription!

The Cover RX is very easy to install with the its under mounting installation plate. The under mount design also allows for installation on whatever side of the spa you choose! This also eliminates any need to drill holes in the side of your hot tub, so whether you are worried about your hot tub not supporting a side mount lift or you just want to keep your cabinet pretty and hole free, this is the perfect solution. The under mount design also makes the lift compatible with spas of all shapes---round, square, rectangle, or octagon, it doesn’t matter all will work with the Cover RX. The under mount design will work on spas between 24”-40” in height.

The Cover RX also only requires minimal clearance to operate versus many of its competitors! The Cover RX only needs 14” of clearance with no side clearance needed. This makes the Cover RX ideal for spas in tight spaces or where clearance is an issue.

The Cover RX is very easy to operate, designed to be operated by a single user from the side, back or even inside of the spa. Having a single gas shock that assists with the raising and lowering of the cover there is no strain on you. The Cover RX also fully supports your spa cover which puts absolutely no stress on your cover and will prolong the life of your cover.

The Cover RX is made of high quality powdered coated aluminum for added durability. It also features a 5-year limited manufacturer’s warranty. There has truly never been a more complete spa cover lift.