Call 8am-5pm MT M-F 1-866-724-6240

Friday, April 15, 2011

Replacing My Spa Pack


Your Spa Pack is basically the brains, or motherboard of your spa. Its job is controlling all your spas components like your pump, heater, lights, and more. As the main control system, having a Spa Pack that is in good condition and working properly is very important. Thousands of spas are thrown out each year because of bad control systems, when the shell and cabinet are fine. Typically, you can save yourself thousands of dollars by simply replacing your control system rather than your entire hot tub. If your spa gets a lot of use or is over 7 years old it can be expected that the control system will need to be replaced. Spa cabinets and shells have a much longer life span than control systems, which means you can take advantage of that by replacing the spa pack once or twice during the shell and cabinet lifespan before throwing your tub out and investing in a new one.

When shopping for a new spa pack it is important for you to know a few things about your existing one. For starters, is it a 120 Volt or a 240 Volt system? What combination of items is your existing pack controlling? How many pumps do you have and how many speeds do each of those pumps have? Do you have an ozonator? What about lights? How many kilowatts is your heater? Do you have a blower, circulation pump, or both? Once you know what you need to control you can start shopping.

When shopping the easiest thing to start out doing is find control systems that match the capability of your existing system. For example, if your current system runs on 240 Volts and controls a 5.5 KW heater, a two speed pump, an ozonator, and a light that is what you need to look for.

There are a few other important things to consider when shopping for a control pack. Do you also need a new topside control system? Although you can keep your old one if it is working properly and you make sure it is compatible with your new system, we recommend looking at a Value Pack Control System like these from Balboa, they include a new topside control panel, your new spa pack, a new heater, all applicable cords, and an adapter plate to ensure your new topside control can fit correctly. You will also find that usually a Value Pack like these is much more cost effective than purchasing the items separately. You will also want to look for features that protect the pack against corrosion and water intrusion; the M7 packs from Balboa have a plastic enclosure included that will protect against these elements. When purchasing, also be sure to look for a manufacturer’s warranty on the pack just in case something does go wrong with it.

Once you have purchased a new spa pack, it is recommended to have it installed by a professional spa technician, but if you find yourself to be very handy and take the proper precaution’s for working with electrical parts, there is most often a wiring diagram and instructions for installation included.

Tuesday, March 29, 2011

Ozone and Ozonators



First of all you are probably asking, what is ozone? Ozone is a form of oxygen that is created when electrical energy breaks apart an ordinary oxygen molecule starting a chemical reaction which results in ozone. Oxygen molecules are split, by a high-energy electrical discharge, resulting in two individual oxygen atoms and those individual oxygen atoms unite with remaining oxygen molecules to produce a three-atom molecule of ozone. The weak bond holding ozone’s third oxygen atom causes the molecule to be extremely unstable and thus, very effective as an oxidizer. An oxidation reaction occurs upon any collision between an ozone molecule and an organic molecule, such as bacteria, viruses, fungus and algae, where the oxygen atom held by the weak bond splits off and only oxygen is left behind.

Next I know you are thinking, that is a great chemistry explanation but how does ozone work? An ozonator system duplicates this process and produces ozone safely and in controlled amounts that can help the sanitizing system in your hot tub. When used together with a sanitizer like bromine or chlorine, an ozonator can deeply reduce the levels of chlorine or bromine needed to maintain clean water. This allows you to save money on chemical costs. Ozone has also been credited with helping extend the life of your equipment, reducing maintenance time and cost, and it purifies your water naturally. Ozone eliminates the need for weekly shock treatments as ozone is an automatic, daily, non-chlorine shock. With ozone you will be able to use 60-90% less chlorine or bromine which allows your ozonator to quickly pay for itself.

In order for an ozonator to be effective in helping sanitize your water it needs to run for 4-6 hours per day. 90% of all new spas come equipped ozonator ready and it is very easy to install an ozonator if it did not already come with one. Ozonators do need to be replaced about every 3 to 5 years so if you do have an older one and it doesn’t seem to be working as well as it used to it is probably time for a new unit.

If you a buying an ozone unit for the first time there are a few things to consider to make sure you get the best one for your specific tub.

Spa Size: The larger your spa the more powerful ozonator you will need.

Sanitation Level Needed: If you often have large groups of people using your hot tub, you will want an ozonator that has a more powerful sanitation output.

Electrical Needs: You will need to determine what voltage and style cord you need. Ozonators come with a variety of different cords and in 120 volt, 240 volt, or dual voltage options.

Ozone is a great option for your spa in providing a natural sanitizing system while allowing you to save money on chemicals. You will eliminate the need for weekly shocking, which will also save you time. Who doesn’t like to save time and money? With ozone you will have the cleanest, clearest sparkling water that can be found in any hot tub!

Friday, March 11, 2011

Pristine Blue, A Non-Chlorine Option

One of the few things that people dislike about swimming or hot tubing is the chemical odor that can come from the water—not to mention the burning eyes, itchy skin, and chlorine taste when you accidentally get a little drink of the water. Chlorine can also bleach swimming suits and the vinyl liners in pools. Chlorine can be hazardous to store and corrode equipment. Because chlorine has been the dominate product on the market for so long many people don’t realize that there are other choices out there.

If you are interested in going with a Non-Chlorine System, we recommend Pristine Blue. Pristine Blue can provide some advantages over chlorine if you are looking to get rid of the “chemical” odor and side effects that come with chlorine. Pristine Blue is gentle on the skin and eyes and allows for you to swim right after application, unlike chlorine with which there is a need to wait awhile before using the water. Being EPA registered in every state and NSF/ANSI Standard 60 certified shows that Pristine Blue is safe.

There are six different products that make up the Pristine Blue Non-Chlorine water system.

The first, Pristine Blue, is the cornerstone of the system, it works as an algaecide and bactericide while being environmentally friendly also. The active ingredient of Copper Ions, that is bonded with a unique carrier allows Pristine Blue to put enough copper into the water to control both bacteria and algae. The active ingredient is long lasting and stays suspended in the water making it so that after the initial dose you only need to test your level of Pristine Blue every two weeks and top it off as needed with more Pristine Blue, this makes water maintenance very quick and easy!

Pristine Clean, will work against scale and metal build up. Metal and mineral particles can come into your water from things like jewelry, hoses, and metal equipment, Pristine Clean prevents these particles from bonding to your pool or spa walls, keeping your surfaces sparkling clean. Pristine Clean can be added every two weeks when you check your Pristine Blue.

Pristine Power is a non-chlorine shock that dissolves quickly and removes odors, organisms, contaminants and body oils that can cause cloudy water. For swimming pools it is recommended to add Pristine Power weekly or biweekly depending on use, for spas adding the recommended dose of Pristine Power should be done after each use, but not exceeding once per day.

Pristine Extra is a di-chlor based shock that is used for initial startup. This product is 99% sodium di-chlor which dissipates very quickly and lets the water rapidly return to its non-chlorine status.

For clearing cloudy water, Pristine Clear will do the job. It brings suspended particles together which allows the filtration system to get them out of the water. Use Pristine Clear as needed with the recommended dosage to keep your water looking crystal clear.

Pristine Check is used to prepare the water before startup with Pristine Blue and also controls calcium in the water. Because Pristine Check collects all the excess calcium in the water before introducing Pristine Blue into the water, you need to make sure to give your filter a good clean after each use of Pristine Check. Pristine Check should be used in spas anytime the water is drained and refilled and in pools it is recommended to add the recommended dose of Pristine Check anytime you are adding make up water.

The Pristine Blue Mini Test Kit is the best way to test the Pristine Blue levels in your pool and spa water. You will also want to use test strips to test the total alkalinity and pH in your water. It is okay to use other pH adjusters with the Pristine Blue system, but you do not want to use any other metal out products, stain and scale products, algaecides, flocculants and cal-hypo shocks. Use of these products is not needed and may cause Pristine Blue to be ineffective in controlling algae and bacteria.

No matter what sanitation system you choose to use it is always very important to follow the dosing instructions of the product you are using and be sure to test and maintain your water as recommended.

Friday, February 11, 2011

Cover RX by Cover Valet



Finally, a hot tub cover lifting option that will work for virtually any above ground spa! This cover lift does away with problems that people often run into when searching for a cover lift, like shape, clearance, mounting options and more. The Cover RX is truly the right prescription!

The Cover RX is very easy to install with the its under mounting installation plate. The under mount design also allows for installation on whatever side of the spa you choose! This also eliminates any need to drill holes in the side of your hot tub, so whether you are worried about your hot tub not supporting a side mount lift or you just want to keep your cabinet pretty and hole free, this is the perfect solution. The under mount design also makes the lift compatible with spas of all shapes---round, square, rectangle, or octagon, it doesn’t matter all will work with the Cover RX. The under mount design will work on spas between 24”-40” in height.

The Cover RX also only requires minimal clearance to operate versus many of its competitors! The Cover RX only needs 14” of clearance with no side clearance needed. This makes the Cover RX ideal for spas in tight spaces or where clearance is an issue.

The Cover RX is very easy to operate, designed to be operated by a single user from the side, back or even inside of the spa. Having a single gas shock that assists with the raising and lowering of the cover there is no strain on you. The Cover RX also fully supports your spa cover which puts absolutely no stress on your cover and will prolong the life of your cover.

The Cover RX is made of high quality powdered coated aluminum for added durability. It also features a 5-year limited manufacturer’s warranty. There has truly never been a more complete spa cover lift.

Wednesday, February 9, 2011

Hot Tub Leak Repair


Having a leak in your hot tub can be a real pain, especially if you don’t know what you’re looking for and how to find it. Following a few simple steps, you should be able to find the source of the leak and be able to decide how to proceed with a repair without a lot of headache.

Before beginning your search for a leak be sure to disconnect all power to the hot tub. Once you are inside the equipment compartment, most leaks can be sourced to certain parts of the tub such as:

  • · Pump Wet End Seal
  • · Heater Assembly Manifold
  • · PVC Plumbing Parts and Tubing
  • · Jet Bodies
  • · Slice and Gate Valves
  • · Connections

Pump

Once you are in the equipment compartment the first place you will want to check is the pump, often a bad pump seal can be the cause of the leak. If you find the water to be leaking from the pump you will want to determine whether just a new seal is needed or if the entire wet end should be replaced. Replacing your entire wet end may save you a lot of headache as new seals can be somewhat difficult to install without breaking them or other components within the wet end.

Unions

You will want to check all of the union fittings located around the pump and the heater. Even in brand new spas unions can become loose due to vibrations during shipment. Do not use a wrench to tighten hot tub unions. Unions should be fairly simple to tighten by hand, if not you may need to remove them realign parts for a straighter fit and then tighten by hand. Do not use a wrench to tighten hot tub unions.

Heater

Your heater assembly manifold consists of your heater assembly, pressure switch, and other components of the heating unit. If you find the leak to be within any of these parts you will need to proceed with replacing the necessary parts.

Valves

Next, check all valves in your hot tub as they can be a common source of leaks. On knife style valves, there is a gasket between the two halves that are bolted together that could be causing leaks. Also, some manufacturers build hot tubs with valves installed on either side of the pump so that water does not need to be shut off to allow access to the pump for repair or replacement. In theory the idea is a good one but often owners will choose to remove these valves as they are a very common source of leaks and can be more of a headache than they are helpful.

Connections and Jets

At this point if the source of the leak has not been located you will want to move on to checking all of your jets, pipes, and connections. Leaking jets can be caused by a bad gasket in the jet body but it is also possible for jets to go bad overtime and they made need to be replaced. When checking connections they may need to be tightened or resealed with PVC glue.

If you do not want to tear into your equipment and spend the time and headache of trying to locate a leak a great first step repair option is Fix-A-Leak. Fix A Leak is blended concentrated material designed to seal leaks in virtually any material and can be applied for leaks in the shell and works equally well in the plumbing. It is made specifically for hot tubs and can fix leaks up to 1/8” in diameter. Trying Fix-A-Leak first may save the headache of trying to locate the leak in your equipment, if the use of fix-a-leak as directed does not work you can then proceed with the above mentioned steps in attempting to find the leak.

Fix-A-Leak is very simple to use, just complete the following steps:

DOSAGE:
USE 8oz PER 1,000 GALLONS OF WATER FOR MINOR LEAKS. A SECOND BOTTLE CAN BE ADDED FOR LARGER LEAKS.

Steps:
1. First determine water loss in a 24 hour period
2. Fill to original level, mark water line
3. Remove all cartridges or filtering devices
4. Slowly add Fix A Leak with pump running through skimmer
5. Recirculate for 6-8 hours. Shut system off
6. Check water level the following day
7. If level remains the same the leak has stopped
8. Allow 48 hours before resuming operation
9. It's recommended not the use spa till leak is fixed and the remainder of Fix A Leak is filtered out.

If Leak has slowed and not totally stopped you may add more product to increase strength of solution already in spa.

Stir Fix A Leak in the spa with soft broom to get solution back into suspension.

Follow steps 5-8 as before.

Product Note:
Normally Fix A Leak will seal holes 1/8" in diameter. The product requires pressure to ensure it's impacted into the area of the leak. Leaks created by a crack in a pipe in all probability will be sealed. The leak may reoccur due to vibration which in turn will migrate in size, recreating the leak. Most spas are foam insulated, and when saturated with water, will greatly delay the cure time of Fix A Leak. It would be best to drain spa, immediately wipe down shell with a damp cloth to remove any residue of Fix A Leak. Allow 3-5 days before refilling, in most cases this will allow the product to cure.

Thursday, February 3, 2011

Top Side Control Panels

Being able to control your hot tub is very important so that everything works the way you want it to. Ensuring you have the ideal temperature settings and are running efficiently but also conserving energy when possible will make your hot tub experience as enjoyable as possible. Your Top Side Control System is responsible for all of these functions; it communicates your choices to the “brain” or your spa control pack. Depending on what type of spa you have and what options you need to control, there are many different top side panels available.

Before purchasing a new top side panel you will want to ensure that it is compatible with your existing spa control pack. Often times you can get a part number off of your existing top side panel simply by pulling it up out of its housing in the spa. There is usually a sticker on the side indicating a part number from the manufacturer, otherwise get the part number for your spa control pack and a simple call to the manufacturer and you can figure out which top side control panel will work for you.

As stated before depending on the type of spa you have there are many different control options available. Some hot tubs will only have one button on the control panel and others will have as many as eight control buttons, here is a little over view of the options available for different topside panels:

Jets:

This button will control water flow through your jets; some larger tubs can have up to three jet buttons that control different sections of jets within the spa. Many also have different speeds that the pump can send water through the jets at. Meaning pushing the button one time will start the jets on a low speed and pushing it a second time will take it to a higher water pressure. This function would also depend on whether the hot tub is running with a 1 or 2 speed pump.

Blower:

The “blower” button will control the hot tub’s air blower or bubbler as it is sometimes referred to. The blower introduces air into the water through a series of air injectors. Blowers cause the bubbling effect in the water adding to the ambiance of the spa experience and when used along with the jets creates an even more relaxing experience.

Light:

Depending on what type of spa you have and the lighting options in it, this button can help you to set the mood. The light button is used to control all the light function in the spa, many change colors from red to blue to green, some even have purple and orange. If your hot tub is equipped with a light show function this would also control the different settings within the light show function. With one button controlling all of these options you will have to click through the options one by one to find the one perfect for you and your desired setting.

Temperature Controls:

Most spas that have a temperature control included in the top side panel will have two buttons, a temp up button and a temp down button. Having these controls right at your fingertips makes getting the ideal temperature setting in your spa as easy as the push of a button! This also makes it very easy to turn your spa down a few degrees when it is not being used and then turn it up a few hours before it is going to be used, this will help to conserve a little bit of energy!

Time, Option, or Invert:

If your spa has these function buttons you will want to consult your owner’s manual for instructions specific to your spa.

LCD Display:

These large easy to read displays can tell you things like where you temperature is set or if there may be a problem with some for your equipment based on an error reading that may display on the screen. Having these gives you a reliable communication interface to what is going on inside your hot tub.

Messages can appear on you top side control panel when your spa pack needs to tell you something. Depending on your spa and the control panel you have some of these messages may be telling you it is time for a new filter, other maintenance, or that you may have a potential problem with some of your equipment. Please see your owner’s manual for a complete list of possible panel messages but here are some examples of common ones that may appear.

GF I or GFCI FAILURE: This is telling you that your hot tub could not trip the GFCI breaker and continued operation may be unsafe, probably time to call your spa technician.

HH or HTR TEMP LMT or OH or OHS or OHH: Any of these messages are telling you the spa has over heated and DO NOT enter the water as it could be at a dangerous temperature. Open the cover and allow the water to cool down, once the water has cooled you should be able to reset by pushing any button. You should also test your sensors and make sure everything is working properly.

Some top side systems also provide settings such as Winter Mode and Summer Mode; these allow you to set the different functions on your spa to run at certain times of day in certain seasons. This can help conserve energy and save money on utility bills.

Again in this article, we have gone over many options for topside control systems, some which may apply to you spa and some that may not. For specific details on your spa and top side control system please consult your owner’s manual.