Call 8am-5pm MT M-F 1-866-724-6240

Thursday, February 3, 2011

Top Side Control Panels

Being able to control your hot tub is very important so that everything works the way you want it to. Ensuring you have the ideal temperature settings and are running efficiently but also conserving energy when possible will make your hot tub experience as enjoyable as possible. Your Top Side Control System is responsible for all of these functions; it communicates your choices to the “brain” or your spa control pack. Depending on what type of spa you have and what options you need to control, there are many different top side panels available.

Before purchasing a new top side panel you will want to ensure that it is compatible with your existing spa control pack. Often times you can get a part number off of your existing top side panel simply by pulling it up out of its housing in the spa. There is usually a sticker on the side indicating a part number from the manufacturer, otherwise get the part number for your spa control pack and a simple call to the manufacturer and you can figure out which top side control panel will work for you.

As stated before depending on the type of spa you have there are many different control options available. Some hot tubs will only have one button on the control panel and others will have as many as eight control buttons, here is a little over view of the options available for different topside panels:

Jets:

This button will control water flow through your jets; some larger tubs can have up to three jet buttons that control different sections of jets within the spa. Many also have different speeds that the pump can send water through the jets at. Meaning pushing the button one time will start the jets on a low speed and pushing it a second time will take it to a higher water pressure. This function would also depend on whether the hot tub is running with a 1 or 2 speed pump.

Blower:

The “blower” button will control the hot tub’s air blower or bubbler as it is sometimes referred to. The blower introduces air into the water through a series of air injectors. Blowers cause the bubbling effect in the water adding to the ambiance of the spa experience and when used along with the jets creates an even more relaxing experience.

Light:

Depending on what type of spa you have and the lighting options in it, this button can help you to set the mood. The light button is used to control all the light function in the spa, many change colors from red to blue to green, some even have purple and orange. If your hot tub is equipped with a light show function this would also control the different settings within the light show function. With one button controlling all of these options you will have to click through the options one by one to find the one perfect for you and your desired setting.

Temperature Controls:

Most spas that have a temperature control included in the top side panel will have two buttons, a temp up button and a temp down button. Having these controls right at your fingertips makes getting the ideal temperature setting in your spa as easy as the push of a button! This also makes it very easy to turn your spa down a few degrees when it is not being used and then turn it up a few hours before it is going to be used, this will help to conserve a little bit of energy!

Time, Option, or Invert:

If your spa has these function buttons you will want to consult your owner’s manual for instructions specific to your spa.

LCD Display:

These large easy to read displays can tell you things like where you temperature is set or if there may be a problem with some for your equipment based on an error reading that may display on the screen. Having these gives you a reliable communication interface to what is going on inside your hot tub.

Messages can appear on you top side control panel when your spa pack needs to tell you something. Depending on your spa and the control panel you have some of these messages may be telling you it is time for a new filter, other maintenance, or that you may have a potential problem with some of your equipment. Please see your owner’s manual for a complete list of possible panel messages but here are some examples of common ones that may appear.

GF I or GFCI FAILURE: This is telling you that your hot tub could not trip the GFCI breaker and continued operation may be unsafe, probably time to call your spa technician.

HH or HTR TEMP LMT or OH or OHS or OHH: Any of these messages are telling you the spa has over heated and DO NOT enter the water as it could be at a dangerous temperature. Open the cover and allow the water to cool down, once the water has cooled you should be able to reset by pushing any button. You should also test your sensors and make sure everything is working properly.

Some top side systems also provide settings such as Winter Mode and Summer Mode; these allow you to set the different functions on your spa to run at certain times of day in certain seasons. This can help conserve energy and save money on utility bills.

Again in this article, we have gone over many options for topside control systems, some which may apply to you spa and some that may not. For specific details on your spa and top side control system please consult your owner’s manual.

Tuesday, January 25, 2011

Jets, Jets, Jets

Your hot tub has become your place to get away from the hustle and bustle of daily life and truly relax. One thing that makes your hot tub different from your normal bath tub and much more enjoyable is your hot tub jets. The jets in a spa provide bubbling and massage action with the water that can sooth tired muscles and other aches and pains making your hot tub truly a heavenly oasis.

When your hot tub jets wear out or break it can sometimes be difficult to find the correct replacements for them. Depending on the brand of your spa, the manufacturer may have their own jets that you will need to use for replacements or some may use a more universal brand of jet like Waterway or CMP, these jets can be replaced with hundreds of options as long as they are the same size. The great thing about spas that use these to universal brands is it opens up choices for you in color and massage style.

There are many massage styles available and you will want to choose those by thinking about the area on the body which you are targeting. Large more powerful jets should be used in the areas targeting core muscle groups like the shoulders, back, legs, and feet. Soothing, soft flow jets should be considered in areas targeting areas such as the neck, hands, wrists, and calves. Many tubs will have an entire cluster of mini jets together for a more massage like experience. For special concern areas or for a more unique experience you can also consider, hand held jets, which are much like a hand held shower head in that you can use it to target any area of your body as you choose.

Many styles of hot tub jets are interchangeable as long as they are the same size. Most jets can be easily removed by turning them to the left and then they will pop right out. For example if you have one style of jet in a position for massaging your back but you would prefer it to be in a foot massage area as long as they are both the same size you can remove both jets and simply switch their places in the tub.

In order to extend the life of the jets in your hot tub you will want to drain and refill your hot tub at least every 3-4 months, maintain good water chemistry, and periodically use a product like Spa Purge that removes the buildup of organic waste from the hard to reach places in your hot tub like the inside of your jets.

No matter what brand your hot tub is or if it has 4 jets or 40 jets, they can be the key to maximum enjoyment. You can customize your hot tub just for you by selecting jets to target problem areas, selecting the massage type you prefer, and also switching around jets as you wish. With hot tub jet the relaxation and enjoyment possibilities are endless.

Friday, January 21, 2011

Spa Frog Systems

Spa Frog Systems allow you to keep bromine levels low in your spa when partnered with the Frog Minerals; the minerals destroy bacteria and reduce bromine use by up to 50%. Spa Frog Systems are much easier on you as far as spa maintenance is concerned. Simply set them and go for weeks at a time. Mineral cartridges will last up to 4 months and bromine cartridges only need to be replaced every 2-4 weeks depending on the use of the spa. No matter which Frog System you use it will make your water clean, sparkling, and soft.

Inline System

The Spa Frog inline system is factory-installed on selected newer spa models including: Emerald, Saratoga, Caldera, Marquis, Morgan, Watkins Hot Spot, Pacific Hot Tubs, and Leisure Bay spas.

The inline system is built directly into the spa, very easy to use with one bromine cartridge and a mineral cartridge. For easy top loading of replacement cartridges, simply open the cap, pull up the holder and snap them in.

Floating System

The Spa Frog Floating System will make your spa the perfect place for soothing relaxation, using up to 50% less bromine. Pre-filled mineral and bromine cartridges simply snap into a reusable floating holder and will work in any spa.

Mineral Spa Care

Mineral Care is a simple system that fits right inside your filter. All you need to do is simply supplements the minerals with a low level of bromine or chlorine.

Spa Frog Test Strips

The newest product from frog is the Frog Test Strips they are specially formulated for precise reading of low chlorine or bromine levels plus pH and total alkalinity. For use with Frog Mineral Systems that reduce chlorine or bromine use up to 50%. Pool Frog requires at least 0.5 ppm of chlorine while Spa Frog requires at least 1.0 ppm bromine.

Frog Test Strips Test For the Following:
Free Chlorine 0 - 3.0 ppm
Bromine 0 - 6.0 ppm
Alkalinity 0 - 240 ppm
pH 6.8 - 9.0
50 Test Strips

Frog Pool and Spa test strips are also great for any application in which accurate low range bromine or chlorine test results are needed. Experience the mineral benefits of using up to 50% less chlorine or bromine with Pool Frog and Spa Frog test strips.

Wednesday, January 5, 2011

Hot Tub Water Chemistry

Why is water chemistry important? Good water chemistry is the key to a healthy and happy hot tubing experience. Because hot tubs are not drained after each use like your bath tub is, there are certain things that need to be checked and maintained in order to keep your water in pristine bathing condition. Keeping your water chemistry in check will also extend the life of your equipment by fighting against stain and scale build up, preventing clogged filters, and preventing algae and bacteria.

Warm water in spas and hot tubs can make a great breeding ground for microorganisms and bacteria. Those can be transferred into the water by the bodies of the bathers, as well as airborne items such as viruses, spores, and algae. When left in the water untreated these organisms can lead to excessive skin irritation and even illness. Thank goodness for sanitizers, these will kill the bacteria that are in the water and leave it clean and healthy for you, your family, and friends to enjoy.

Sanitizer

Sanitizers such as Bromine, Chlorine, Pristine Blue, and Spa Frog Mineral systems will keep your water clean as long as they are maintained at the appropriate levels. Whichever option you choose to use, you will want to be sure and test your water often to ensure levels are being maintained within the recommended ranges for that form of sanitizer.

These sanitizing systems will work great but you will want to be sure to also use a shock treatment with them. Shock Treatments like SpaPure Oxidizing Shock or ProTeam Multi Magic Shock will oxidizes or break-down the dead organic material left behind from your sanitizer system, as well as non-filterable material such as body oils, lotions, films, hair spray, dirt and perspiration. An occasional shock treatment is a must to maintain clean, clear water in you hot tub.

pH

It is also very important to maintain control of the water’s pH level in your spa. The measure of acidity and basicity in the water is called pH. The pH scale ranges from 0-14. Levels of pH less than 7.0 are acidic while pH levels greater than 7.0 are basic. The proper pH range for a spa is 7.4-7.6. In order to maintain water comfortable for bathers these levels need to be maintained.

pH levels over 7.6 can cause scale build up, less effective sanitation, and a prematurely dirty filter. To bring pH levels down it can be done simply by adding the recommended dose product such as Spa Pure pH Down or ProTeam Spa Liquid pH Down.
Low levels of pH under 7.4, can cause bather discomfort, corrosion of equipment, and rapid depletion of sanitizer. If you need to increase your spas pH levels we recommend either ProTeam Spa Liquid pH Up or SpaPure pH Up.

Total Alkalinity

Total Alkalinity is a measure of the amount of buffering capacity in the water. It acts as a shock absorber for the pH. If Total Alkalinity is too low, the water is acidic and can corrode equipment and hot tub surfaces. It also causes pH bounce. The pH will drift down and any adjustments made to it will bounce and be difficult to control. If Total Alkalinity is too high, the water is alkaline and scale buildup and cloudy water can result. The pH will tend to drift up and will be very difficult to adjust. For more detailed information on controlling your spas total alkalinity please refer to What is Alkalinity?

Calcium Hardness

Calcium or Total Hardness refers to a measure of minerals in your water such as calcium and magnesium. It is important for your water to have some level of hardness, if it doesn’t it will begin to draw metal off of other sources---like your equipment and cause corrosion. If the water is too hard it can cause scale formation and cloudy water. If your tap water is very hard the use of a pre-fill filter can help in bringing down the hardness before putting the water into your spa. There is no chemical way to lower hardness levels but you can use SpaPure Stain and Scale Preventer to help avoid build up. Hardness levels should be maintained between 100- 250 PPM's for acrylic finish, and 250-450 PPM's for plaster finish. If you need to increase your levels it can easily be done using SpaPure Hardness Increaser or SpaPure Calcium Up.

Changing the Water

Water chemistry can be effected by a number of different elements, including chemicals, airborne contaminants, and the number of people using it and how often. To maintain good water chemistry we recommend a water change every 1-4 months depending on the use of the spa. To drain the spa you will want to turn off the electricity to the spa, locate the drain spout and attach a garden hose, this method can take a while so if you are looking for a quicker way of draining we recommend the Little Giant Pool Cover Pump, this will drastically increase the speed at which your draining takes place.

When refilling the use of a Pure Fill Spa Pre Filter, which hooks right to your garden hose, will make your initial water chemistry balancing much easier as it is like filling your spa with bottled water.


Tuesday, December 28, 2010

Tips to Host the Perfect Winter Spa Party

Although most of us duck inside to the safety of warm blankets and thick socks at the first sign of cold, winter can be the perfect season for hosting a hot tub party for friends and family! Since we’ve gone over how to prepare your hot tub for winter, hot tub maintenance and selecting a hot tub cover, it’s time to put together the ultimate get together!
To throw a great winter hot tub party, nothing is more important than making sure you have the right party accessories.

Spa Accessories

Drinks: Baby, it’s cold outside! So make sure your guests have something warm to drink to keep them toasty while they soak in the spa. We recommend winter favorites such as hot cocoa and coffee, as well as some holiday classics, like eggnog or toddies. Nowhere to place them? Purchase a removable spa shelf so guests can easily reach their drinks.

Toys: Your family is snowed in and the kid’s school got canceled? Time for a hot tub party! Grab some waterproof playing cards and have some family time playing canasta or go fish.

Relax: Nothing is as relaxing as dipping into a hot spa on a cold day - add an inflatable hot tub pillow to maximize relaxation for your guests, or try to swirl in some soothing spa aromatherapy crystals to enhance the overall experience for everyone.

Safety: Don’t forget that sun damage can occur even in the winter! If you are hosting a daytime spa party, be sure to provide waterproof sunblock for friends and family.

Entertainment: Set up a portable DVD player by the hot tub – either on an attachable spa shelf or a table nearby – and pop in your favorite film for a perfect afternoon. If you’d rather keep things more social and conversational, plug your iPod into a portable stereo on a nearby table to enjoy music while socializing with friends and family.

Prepping for the Party

Scenery: A winter spa party set against a crisp white landscape can relax, soothe, re-energize and completely clear your mind. Soak up the surroundings by making sure any unsightly gardening tools or hoses are kept out of site. If you are hosting guests at night, be sure to switch on any holiday lights outside as well as the hot tub light to really enhance the mood! To keep guests warm once they are out of the tub, you can even build a bonfire (purchase a chiminea or fire pit to ensure safety).

Cover Ups: Avoid discomfort by preparing for your guests ahead of time. Suggest that guests bring a robe for after the hot tub and provide everyone with a warm towel once the hot tub portion of the evening is complete. Be sure to lay out mats by the door to keep water from dripping inside the house. Keep guests safe and healthy by providing a warm retreat from the cold in addition to towels, robes and/or socks.

Indoors: Now that you and your guests have enjoyed the invigorating mix of brisk winter air and hot, soothing water, it’s time to relax in the living room with a glass of brandy for the adults and a movie for the children. Light a fire and enjoy the cozy environment, it’s the ideal way to wrap up a winter spa party!

Hot Tub Warehouse is a supplier of quality, name-brand spa maintenance products and spa parts. As an online resource for the very best solutions for all your hot tub needs, Hot Tub Warehouse offers you the best selection of products.

Monday, December 20, 2010

Take a Load Off With a Hot Tub Cover Lifter

It’s been another long work week and you want to enjoy a soothing soak in the hot tub. The only thing standing between you and the most relaxing part of your evening is that massive spa cover.
Make life a little easier with a
hot tub cover lift – easy to use, affordable and great for protecting your spa from the elements, cover lifters will give you the little extra helping hand that you need!

Spa Cover Protection

In addition to eliminating back strain and aches, a hot tub cover lifter can lengthen the life of your hot tub cover. Using a cover lift reduces the wear and tear on your spa cover caused by constantly dragging it on and off. With constant pulling, tugging and scraping along the floor, your spa cover will not last very long! Diminish the damage to your spa cover by installing a spa cover lifter that will keep the cover from dragging on the floor and potentially getting torn.

Insulation

Increase your spa cover’s insulating capabilities with a spa cover lifter which provides another layer of heat retention during the brutally cold winter months, thereby reducing the time and energy needed to reheat the water for use and minimizing the potential for any water freezing.

No Water Logged Covers

If your spa cover is a little older, changes are that it has been water logged and is heavier than normal! Heavy spa covers are cumbersome to remove and can cause back pain, not to mention, water logged spa covers can actually diminish in efficacy as the water may seep into the foam lining and damage it. Eventually, every rigid foam spa cover will saturate with moisture and become ineffective.

A damaged cover will not be effective in insulating your spa and can actually do more harm than good. We recommend implementing a hot tub cover lifter to keep that cover up and off the water.

Ease of Use

This simple mechanism allows one person to remove the spa cover quickly and easily and without the aid of another person. Eliminate strain on your back by using a cover lift to do the heavy lifting for you!

Hot Tub Warehouse is a supplier of quality, name-brand spa maintenance products and spa parts. As an online resource for the very best solutions for all your hot tub needs, Hot Tub Warehouse offers you the best selection of products.

Wednesday, December 15, 2010

Hot Tub Water Testing


















Much like a car or a perfectly landscaped yard, owning a hot tub requires a certain amount of upkeep to ensure longevity and usability. Maintaining your spa’s cleanliness and equipment will ensure years of use and enjoyment and keep overall cleaning time to a minimum as problems will not be able to build.

The most crucial element of spa care is the chemical balance of its water which, when well maintained, will reduce the negative effects of regular usage. When people use the spa, residual soap, perfume, cosmetics, lotions, deodorants, perspiration, and other natural body oils may be released which can contaminate the water and mix with the spa’s chemical balance.

It is important to be aware of the frequency of spa usage in your home so you can create a cleaning schedule accordingly, and to use products specifically formulate for hot tubs exclusively. However, how do you know what to do once the water is no longer crystal clear? You delve into your owner’s manual only to be bombarded with a slew of terms you have never before heard – calcium hardness? Alkalinity?

Don’t panic! Water testing is easy and quick and will ensure a longer life for your spa and its equipment.

Glossary

PPM: stands for “parts per million” and is a measuring unit used to indicate quantities of chemicals that ought to be introduced to the water.

Alkalinity: total alkalinity must be correctly balanced prior to measuring pH otherwise the pH readings will be incorrect. Total alkalinity needs to range from 80 to 120 PPM to be considered acceptable. Remember that pH-lowering chemicals will also affect the total alkalinity of the hot tub.

pH: remember bases and acids in high school chemistry? pH is a measure of how acidic the water is which can impact the state of your equipment. This is one of the most important factors in water balance because extreme acidity can cause serious problems including corrosion on your spa parts and skin irritation for users. On the other hand, a high pH reading (meaning the water is basic) can cause cloudy water and scale formation. The right balance of the two would result in a pH reading between 7.2 and 7.8.

Calcium Hardness: a measurement of minerals (calcium, magnesium) in your spa water, this is sometimes referred to as “overall hardness.” A certain amount of calcium hardness is good as without it, the water will draw from other minerals (copper, iron, aluminum) which can cause corrosion on your hot tub equipment. Calcium readings ought to measure between 100-250 PPMs from acryclic tubs and 250-450 PPMs for plaster.

Sanitizer: Like any other item we use, hot tubs too can get dirty! Sanitizers keep bacteria and viruses from growing and spreading as they are want to do in hot water. These products keep the water clean and fresh. The two most popular sanitizers are bromine and chlorine – which one you use depends on your spa so be sure to check your owners guide.

Testing Kits: Liquid vs. Strips
In the past, liquid test kits have been considered more accurate in determining hot tub water quality. However, these tests can be complicated and cumbersome and with advancements in hot tub testing kits, modern strips are just as capable of accurately and precisely calibrating water quality. Plus, they are easier to use and more economical!

Adjusting the pH
If you tested your pH and the result was too acidic (reading below 7.2), correct is by adding the SpaPure pH Up liquid. Alternately, a pH reading above 7.8 indicates that the water is too base and needs to be decreased by using the pH Down product.

Before adding any chemicals to adjust the pH, be sure to test total alkalinity levels!

Adding Sanitizers
Chlorine readings need to register between 1.5 and 3.0 PPMs while for bromine the levels ought to be 3.0-5.0 PPMs.

Adjusting Calcium Hardness
Since there is no way to chemically lower the calcium level in your hot tub, the best way to avoid it is to prevent it from happening. However, low calcium hardness can be adjusted with the SpaPure Calcium Hardness Increase product.

Hot Tub Warehouse is a supplier of quality, name-brand spa maintenance products and spa parts. As an online resource for the very best solutions for all your hot tub needs, Hot Tub Warehouse offers you the best selection of products.