Call 8am-5pm MT M-F 1-866-724-6240

Monday, October 11, 2010

What is Alkalinity?


What is Alkalinity?
Total Alkalinity is a measure of the amount of buffering capacity in the water. It acts as a shock absorber for the pH. If Total Alkalinity is too low, the water is acidic and can corrode equipment and hot tub surfaces. It also causes pH bounce. The pH will drift down and any adjustments made to it will bounce and be difficult to control. If Total Alkalinity is too high, the water is alkaline and scale buildup and cloudy water can result. The pH will tend to drift up and will be very difficult to adjust.

Total Alkalinity, like pH, is affected by environmental factors. Rain, acidic sanitizers, addition of fill water and other product applications can all change the alkalinity over time. Total Alkalinity should be tested once every three to four weeks.

Proper Total Alkalinity levels vary with the water temperature and the sanitizer used. Ideal range for Total Alkalinity is from 125 - 150 ppm. For chlorine or bromine spas, levels of Total Alkalinity up to 200 ppm are acceptable, and the high cutoff is 170 for Biguanide spas. The cutoff is slightly lower for Biguanide spas due to the foaming tendency of the product and the tendency for pH to drift upward.

High Total Alkalinity

Add PH Down over a period of several days to lower the total alkalinity to the proper level. Discontinue PH Down additions if the pH drops below 7.2. Resume the applications where you left off when pH returns to 7.4 - 7.6. pH adjustment should not be necessary, as the alkalinity will tend to pull the pH up.
If the total alkalinity is high and continues to increase, and the pH is low and does not respond to additions of Balance PH Increaser, the problem could be bicarbonate scale. This occurs when spas are not allowed to gas off properly. Trapped gases or poor ventilation in indoor spas are reabsorbed into the water and drive the pH down and the Total Alkalinity up. It can also cause the water to cloud. To balance successfully, remove any covers and/or ventilate as well as possible and begin making adjustments again. Keep the area well ventilated or the cover removed until the hot tub water balance is returned to normal. To prevent this problem, remove covers or ventilate indoor spas for several hours a day to allow gasses to escape.

Basic Tips to Clean Your Hot Tub Spa Filter


Having trouble maintaining your hot tub water at the quality you would like it? Maybe it is time to see how your spa filter is working for you.

The most important thing when it comes to having high quality hot tub water is your filtration system. If your filter is worn out or clogged it will not do its job of filtering the contaminants out which then puts strain on your spa’s pump and heater.

Your spa filter cartridge should be rinsed and cleaned every two weeks to monthly depending on the spa usage. In order to clean the filter you will want to pressure wash it at a 45 degree angle with your garden hose both inside and out in order to make sure it is clear of all dirt and debris. Spray between each pleat to ensure that all foreign material is cleared. The filter flosser is a great attachment for your garden hose to ensure the filter gets a deep clean. It can also help you clean your filter 50% faster & using 50% less water and it also virtually eliminates back-splash.

Some particles such as algae, suntan lotion, and body oils may not be able to be removed just by hosing the filter. These contaminates can clog the filters pores leading to greatly reduced filtration. In order to rid the filter of such contaminants you will want to use a cleaning compound such as SpaPure Filter Cleaner. It works overnight. A 12 to 14 hour soak of your filter will assure complete removal of all contaminants including those that may have been deeply set. SpaPure Filter Cleaner is compatible with chlorine, bromine, and biguanide sanitizers.

Spa Filters should be replaced annually. Many people also prefer to use the rotation method of keeping a spare clean dry filter on hand all the time to immediately replace the one being removed for cleaning. This will help your filters last longer and you will never lose a minute of usage in your spa while waiting to clean a filter.

Here are a few other tips when it comes to maintaining your hot tub filter:

· Never use a power washer or dish washer to clean your filter cartridge as the pressure could damage the filter media.

· Never use household cleaners or laundry detergent, or bleach to clean your filters, as they could cause major foaming problems in your spa water.

· We recommend that you keep a spare clean dry filter on hand to rotate your current filter with.

· We recommend you replace your filter cartridges yearly.

· Always follow your equipment manufacturer's instructions for removing and reinstalling hot tub filter cartridges.

· Find new or replacement filters in our Spa Filters Search Tool, whether you are currently using Filbur Filters, or another branch such as Pleatco Filters or Unicel Filters just type in the number and we will find the filbur replacement. You can also search for a replacement by dimensions if you do not know the model number you are currently using.

Thursday, September 23, 2010

How to Prepare Your Hot Tub for Hurricane Season

With Tropical Storms Karl and Lisa picking up speed off of our nation’s coasts, homeowners are beginning to stock up on dry goods, bottled water, and first aid supplies. However, for many homeowners, preparing the home also encompasses preparing the garden as patio furniture, delicate plants, outdoor structures, pools and hot tubs also need to be protected against possible incoming storms.

Preparing your hot tub for a storm, whether it be a severe tropical storm or a hurricane, takes little time and can avoid a great deal of damage both to the spa and, potentially, to your home. It can also save you money on repairs to damages once the storm has blown over!

Hot Tub Tips for Hurricane Season:

o Do Not Drain the Hot Tub
o Turn off Electric Power: any equipment that requires electricity must be shut off by turning off circuit breakers at the main electrical panel.
o Remove Loose Items from the Area: tables, pool and spa accessories or toys, chairs and other items must be stored safely away from the area; typically it is best to store these inside a garage or storage unit as they can become dangerous projectiles if wind speeds are strong.
o Protect All Equipment: wrap your spa parts in waterproof plastic and tie it securely to avoid dirt, small debris and water from entering; if possible, remove vulnerable, exposed items and store them inside the house.
o Add Extra Chemicals: whether your spa uses chlorine or hot tub bromine, add an additional dose in order to prevent contamination from the anticipated debris and dirty water of the storm.
o Do Not Cover the Spa: contrary to what instinct would have us do, it is best to leave your pool or hot tub uncovered during a storm as it is easier to remove debris from a pool or hot tub after a storm then to have to clean up a potentially destroyed pool or hot tub cover. Storms bring wind, and wind can cause falling branches and other flying debris that can damage pool covers.

Preparing Your Yard for Storms:

o Trim tree limbs and branches that extend above cars, pools and/or hot tubs to minimize potential damage; prune any plants or bushes.
o Remove Metal/Glass Items from your Yard: store all metal and glass items inside a garage or house as items such as these could damage, scratch or damage the inside finish of your pool or spa; additionally, if these items shatter in your pool or hot tub, it is virtually impossible to clean up glass shards.
o Protect Delicate Plants: flowers and plants that are particularly delicate ought to be stored inside if at all possible (i.e.: potted plants); for plants that cannot be moved inside, wrap them in protective plastic and secure tightly – although this will not protect them from large debris, it will keep small debris and slashing winds and rain at bay.
o Bring in flags, awnings and umbrellas.


Hot Tub Warehouse is a supplier of quality, name-brand spa maintenance products and spa parts. As an online resource for the very best solutions for all your hot tub needs, Hot Tub Warehouse offers you the best selection of products.

Wednesday, September 15, 2010

Basic Tips for Spa Maintenance

Chances are you have received a wealth of conflicting information on how to take care of your hot tub. Friends and family offer helpful tips, your owner’s manual comes with a long list of prescriptions and your chemical testing kit probably has its own suggestions. With all of this information available, how do you know what is useful?

There are a few basic rules that all hot tub owners ought to follow in order to ensure a safe and pleasant spa experience for everyone, including maintaining your water and chemicals, and ensuring that all parts are operating correctly. Taking time to maintain your hot tub can save you time and money down the road as you will not need to replace parts or drain the water as often!

1. Change Your Water Every 3, 4, or 6 months

This depends on frequency of usage and whether your hot tub is well maintained. Hot tubs that have efficiently working spa parts and whose water is treated may last longer, but remember, no amount of chemical additives can protect you completely in water that is old and dirty. To be on the safe side, change the water quarterly.

2. Daily Duties

Some hot tub maintenance tasks need to be completed daily to make sure you hot tub runs smoothly and to avoid larger, more serious problems down the road. These tasks take a few minutes a day:
Check your pH levels: should be between 7.2 and 7.6.
Check chlorine levels: should be between 1-3 mg/l (ppm). Use Hot Tub pH Plus or Minus according to instructions to recalibrate.
Bromine is more common in hot tubs and bromine should be between 2-4 ppm.
Check for foam

3. Weekly Duties

It is important to do the following on a weekly basis so as to not let dirt or grime pile up as this will results in more work in the future, as well as potentially damaging your equipment:
Shock hot tub
Clean your spa filter: make sure the filter is placed correctly in the canister to ensure that the water is filtered and to maximize jet pressure. Replace filters every twelve months as degraded filters will cause cloudy water. If your filter is under a year old, make sure to clean it on a monthly basis and soak it in degreaser. Always have a spare 2nd filter as filters have to be allowed to dry first so that the fibers can bind together after cleaning.
Check your water: how often you need to check your water depends on a variety of factors – your frequency of usage, whether you use a hot tub cover, whether the spa part are functioning correctly, etc. In general, it is a good idea to check your water twice a week, just to be on the safe side.

4. Clean Your Hot Tub Cover

Every 6 months, clean your hot tub cover with a diluted chlorine solution that includes UV protection

Ashley Olson, Hot Tub Warehouse. Hot Tub Warehouse is a supplier of quality hot tub parts and accessories, including fitted spa covers and hot tub covers. For a wide selection of hot tub chemicals, testing supplies, filters and more, please visit Hot Tub Warehouse.

Friday, August 27, 2010

Spa Aromatherapy


















If you are one of the millions of spa owners who turn to your spa for relaxation and to soothe away the stresses of life, you can enhance this experience even more by adding a little aromatherapy to the water and melting away into a world of massaging, warm water and soothing scents.


Aromatherapy as a form of relaxation and alternative medicine has been around for hundreds of years. The reason for its longevity and success is that it taps into one of our most basic senses – smell. Our olfactory glands are amongst the most sensitive and powerful in the body and with aromatherapy, we have the ability to surround ourselves with scents that invigorate, relax, soothe or inspire.


Aromatherapy uses the essential oils from a variety of plants, flowers, bark and other natural ingredients to improve your health, both mental and physical, and how you feel.


In addition to easing anxiety, relieving exhaustion and stress and alleviating insomnia, aromatherapy has been linked to improved digestive and respiratory functions. And what better way to reap the benefits of aromatherapy than while immersed in the bubbling, relaxing hot waters of your spa?


While the hot water eases your tired and sore muscles, drop a few scented crystals of some Spazazz elixir into the water to create a swirling, scented, blissful experience. After a rough night of sleep, try some invigorating grapefruit to awaken the senses, or splash some coconut or green tea in to relax you after a long week of work.


Hot tub aromatherapy crystals that are filled with emollients will help to soothe and relax your tired muscles and since they also have minerals and softeners inside of them you will get out of your hot tub with your skin feeling renewed as well.


For best results, be sure to use hot tub aromatherapy items as other non-specific products may alter the water chemistry resulting in cloudy water or an unsafe spa condition. In some cases, non-spa aromatherapy products have been known to react with the other chemicals in the water and produce foam that clog filters.


Whatever your aromatherapy goal is, whether to relax or energize, with spa crystals and scented elixirs you will be able to further enjoy your hot tub!



Ashley Olson writes for Hot Tub Warehouse: your one-stop shop for all hot tub supplies. To find the right spa parts and hot tub testing products, please visit Hot Tub Warehouse and don’t forget – we have free shipping on order over $75!

Wednesday, August 18, 2010

Why Titanium Heater Elements?



Above: Calcified Element in Tube

Poor water chemistry is damaging to hot tub heater elements, particularly when amplified by abuse or neglect. Additionally, fill water that is naturally high in salt, lime and calcium can also promote a slower, but premature death to elements. Below you will learn why titanium provides a superior defense against "adverse" water conditions, and will extend your hot tubs heater elements useful life.
Chemical FailureCorrosion is the etching and rusting effect that happens to ferrous metals. As water becomes acidic ( low in ph) or overly chlorinated, corrosion is accelerated and your heater element is most at risk. Titanium is not a coating and is non ferrous (less than .03% iron) and therefore will withstand greater chemical punishment, without the pitting, etching or surface breakdown of typical nickel alloys.

Titanium is the Solution!

Right: Titanium Element in calcified Tube

Titanium has become the solution to hot tub heater longevity, and has long been the best defense against chemical & mineral abuse. Even with today's salt chlorinating systems, there has been no other material that has improved hot tub heater longevity like titanium.

Titanium doesn't allow scale to harbor onto the surface. Titanium naturally produces a dioxide film that continually migrate to the surface, and detaches harmful content. Additionally, titanium's surfaces pores do not open when heated, and will not allow harmful chemicals or particles to collect. This "self scaling" miracle can be verified in your own dishwasher. As heavily concentrated detergents are added weekly, your element remains nearly scale free for years. The best commercial and residential dishwashers are equipped with titanium elements for all these reasons.

Titanium contains no iron, & therefore cannot rust or corrode. Given the most adverse water conditions, titanium can resist pitting, oxidizing and surface breakdown up to 10 times better than typical nickel alloy elements. Titanium is not magnetic, and will not attract materials that can attach and promote deterioration. Additionally, titanium has an exceptionally low thermal expansion rate, and this will reduce the stress that can cause structural fatigue and fracture.

Titanium Hot Tub Heater Elements provide your best defense against common recreational water chemicals, and becomes more beneficial and a much better value, when water chemistry is less than perfect!
Above: Titanium Element in Corroded Tube
Article provide by the Hot Tub Heater manufacturer Therm Products.

Friday, August 13, 2010

Tips for Moving a Hot Tub


When relocating to another city or state, one of the most difficult decisions is whether or not to move a hot tub along with all other belongings. On one hand, you have invested a good amount of money in your spa and probably enjoy using it quite a bit. Not to mention, hot tubs and other outdoor improvements increase the value of a home. However, the headaches involved in moving such a bulky appliance can sometimes be enough to dissuade even the foremost spa users from trying to haul their hot tub across country.


Since hot tubs are heavy and require specific packaging to remain protected during the moving process, it is best to hire professional movers as they will have both the equipment and expertise to facilitate moving the hot tub. However, if you are only moving a short distance, within the same city or to a nearby city, it may be more economical to move the hot tub yourself. With a little elbow grease and preparation, you can successfully and safely move your spa!

    PREPARING BEFOREHAND:
  • Read your owner’s manual as this will provide you with any particular details for your hot tub model and will give you directions for how to remove all equipment (heater, spa pump, etc)

  • Detach all electrical and spa plumbing equipment, pack carefully and label clearly so you can quickly identify what goes where

  • Drain your hot tub (if moving to a cold climate, blow out the pipes with compressed air to make sure no water remains in the pipes, which might freeze and crack)

  • Clean the hot tub

  • Disconnect all electric and/or gas lines and secure loose cords

  • Pack your spa cover separately and clearly label so that it can easily be located later

  • Pack all spa items together to ensure nothing gets lost

  • Document your spa’s condition before moving in case damages occur in transit (photos etc)


    STORING/PACKAGING
  • Rent dollies and/or pallets to facilitate moving the hot tub and keep your spa steady during shipping (be sure to select a pallet of appropriate size)

  • Cover your hot tub for transport; some moving companies also suggest using cardboard or foam to cover the corners of the hot tub for extra protection

  • Strap in the hot tub with tow straps so it does not jostle in transit

  • Use ramps to wheel the dollied hot tub into the truck or van

    MOVERS
  • Most moving companies will require you to have the hot tub ready for loading and unloading by your curb or garage

  • Ask your moving company about their insurance coverage and guarantees

  • Before accepting the delivery of your hot tub, make sure to inspect it thoroughly for any damage that may have occurred during transport

  • Get a written statement of work for the Hot Tub move before moving day

  • If you believe damages were incurred during transportation, file a damages claim

Of course as with any large and expensive item, be sure to consult your moving company before making any decisions. It may also be helpful to ask for advice from your hot tub supplier as well as your insurance company so you have all your bases covered when making a decision on how to move your hot tub.


Remember that different hot tubs have different specifications so moving an indoor hot tub may not necessarily be the same as moving an outdoor model. Always refer to your owner’s manual for questions and access other hot tub resources if you have further questions. If you do not feel comfortable moving it yourself, there are plenty of experienced hot tub movers willing to help!



Hot Tub Warehouse is a supplier of quality, name-brand spa maintenance products and spa parts. As an online resource for the very best solutions for all your hot tub needs, Hot Tub Warehouse offers you the best selection of products.